Author Topic: NAMES 2015  (Read 21358 times)

Offline Art K

  • Full Member
  • ****
  • Posts: 1761
  • Madison, Wisconsin USA
Re: NAMES 2015
« Reply #30 on: April 12, 2015, 10:04:33 PM »
Steve,
As I told Stan earlier in the thread I'm in and want to reaffirm that, a spot in the orange section sounds great.
Art
"The beautiful thing about learning is that no one can take it away from you" B.B. King

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: NAMES 2015
« Reply #31 on: April 12, 2015, 10:22:34 PM »
Fill it? Don't think that's an issue. I ran 10 engines at CF and left 2 in the case. :ROFL: :ROFL:
Best,
Stan

Offline stevehuckss396

  • Full Member
  • ****
  • Posts: 1554
  • Sterling Heights, MI USA
    • Steve's Miniature Sparkplugs
Re: NAMES 2015
« Reply #32 on: April 13, 2015, 12:20:30 AM »
I might be jumping the gun here but in the event that the area is free, how much space would each person need?

Post up what you think you might need. Stan, Art, 1/2 table, full table, 2 tables, what do you think you will need? I'll start a list so if they say yes I'll have some idea.
Do not be like the cat who wanted a fish but was afraid to get his paws wet.

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: NAMES 2015
« Reply #33 on: April 13, 2015, 01:14:46 AM »
Steve
1 table if possible.
Best,
Stan

Offline Art K

  • Full Member
  • ****
  • Posts: 1761
  • Madison, Wisconsin USA
Re: NAMES 2015
« Reply #34 on: April 13, 2015, 01:26:23 AM »
Steve,
I think half a table would be adequate for me.
Art
"The beautiful thing about learning is that no one can take it away from you" B.B. King

Offline stevehuckss396

  • Full Member
  • ****
  • Posts: 1554
  • Sterling Heights, MI USA
    • Steve's Miniature Sparkplugs
Re: NAMES 2015
« Reply #35 on: April 13, 2015, 01:40:11 AM »
You got it!

Sshire   1 table
ArtK      ½ Table


Who else is in?  Jimsmodels, Jim Geib, Bob Shutt, tvoght  are you fellows going this year? If so, do you want to sit with the gang? If so how much room do you need.
Do not be like the cat who wanted a fish but was afraid to get his paws wet.

Offline PTsideshow

  • Full Member
  • ****
  • Posts: 56
Re: NAMES 2015
« Reply #36 on: April 13, 2015, 02:29:47 AM »
Steve I sent Dave an e mail about the tables, He said that the shouldn't be a problem withem for MEMcrew!

Offline kvom

  • Full Member
  • *****
  • Posts: 2649
Re: NAMES 2015
« Reply #37 on: April 13, 2015, 02:32:49 AM »
I'll have my big noisy engine at Maury's vendor booth assuming he has air.

If the Comber decides to run I can put it over with the MEM guys.

Offline stevehuckss396

  • Full Member
  • ****
  • Posts: 1554
  • Sterling Heights, MI USA
    • Steve's Miniature Sparkplugs
Re: NAMES 2015
« Reply #38 on: April 13, 2015, 02:47:03 AM »
Steve I sent Dave an e mail about the tables, He said that the shouldn't be a problem withem for MEMcrew!

Thanks Glen!!
Do not be like the cat who wanted a fish but was afraid to get his paws wet.

Offline tvoght

  • Full Member
  • ****
  • Posts: 1001
  • Indiana
Re: NAMES 2015
« Reply #39 on: April 13, 2015, 02:57:59 AM »
I only have the one Stirling engine to show.  1/4 table if that.

--Tim

Offline gldavison

  • Full Member
  • ****
  • Posts: 219
  • Tarkio, Mo.
Re: NAMES 2015
« Reply #40 on: April 13, 2015, 11:18:01 PM »
Steve

Put me  down for 1 table

I'll be there early Friday moring.
Gary
Windows 10 & 11, Alibre Design Pro V27, IntelliCADPro6, CamBam, Mach4, 3D Printers, Cetus, Anet ET5 X
15" South Bend, 10" Logan lathe, Grizzly square column mill, CNC router & Hot wire cutter. Lagun FTV-1 knee mill, Sherline mill & lathe

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: NAMES 2015
« Reply #41 on: April 14, 2015, 12:07:24 AM »
Disagree with KVOM. The Joy's valve engine sounds great, is a beautiful build and is a beast. You know it's a big engine when the head bolts are ¼-20.
Best,
Stan

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: NAMES 2015
« Reply #42 on: April 14, 2015, 12:08:50 AM »
...and, if a group is going out to dinner on Fri and/or Sat., count me in
Best,
Stan

Offline stevehuckss396

  • Full Member
  • ****
  • Posts: 1554
  • Sterling Heights, MI USA
    • Steve's Miniature Sparkplugs
Re: NAMES 2015
« Reply #43 on: April 14, 2015, 01:01:42 AM »
OK men . . . or MEM, here is the scoop. The tables I had hoped for were spoken for but one of them is a member here. Dave set aside a block of tables. They are just one row over. There should be plenty of room and the banner will have plenty of space to spread out. The red is where I'll be and the black is where the MEMbers can be so I can still visit often. I have 6 tables marked but he said we could have 7. I think it's the back left table in the string.


Sshire         1 table
ArtK            ½ Table
tvoght         1/2 Table
gldavison     1 Table

Who else would like to sit in the MEM section?




Do not be like the cat who wanted a fish but was afraid to get his paws wet.

Offline kvom

  • Full Member
  • *****
  • Posts: 2649
Re: NAMES 2015
« Reply #44 on: April 14, 2015, 11:52:36 AM »
Disagree with KVOM. The Joy's valve engine sounds great, is a beautiful build and is a beast. You know it's a big engine when the head bolts are ¼-20.

Head bolts are 10-32, but steam chest  cover  is 1/4 20.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal