Author Topic: hello from Dublin  (Read 2507 times)

Offline Will_D

  • Full Member
  • ****
  • Posts: 9
hello from Dublin
« on: January 12, 2015, 08:43:30 PM »
Hi Guys,

Just renewing some ME interests.

I am a homebrwer with a workshop so guess what I get:

"Hi Will, Could you 'JUST' drill this out to 13 mm (in 316 Stainless), Oh and by the way I have already work hardened it for you by burning out some 6mm drills"

I used to live in Ashton-u-Lyne (NE Manchester in UK) and was fairly involved with Rochdale MES
Now living in Dublin, Ireland (For 23 years)
So if any one from RMES is here I would love to hear from you

May even get round to finishing my 3 1/2" Rob Roy now that I'm retired.

Found you through a reference on MadModder site!

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13837
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: hello from Dublin
« Reply #1 on: January 12, 2015, 08:56:38 PM »
Welcome to MEM Will. Glad to have you join us!!

Bill

Offline ths

  • Full Member
  • ****
  • Posts: 1801
  • Kangaroo Valley, NSW, Australia
Re: hello from Dublin
« Reply #2 on: January 12, 2015, 09:21:43 PM »
Welcome to the forum Will, good to have you here.

Cheers, Hugh.

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 3811
  • Boise, Idaho USA
    • Photo Bucket
Re: hello from Dublin
« Reply #3 on: January 12, 2015, 11:08:37 PM »
Welcome aboard Will!

Home brewing is a great hobby; I just wish that I had more time for it.

Dave

Offline Don1966

  • Full Member
  • *****
  • Posts: 6186
  • Morgan City, LA (Along the Gulf Coast)
Re: hello from Dublin
« Reply #4 on: January 12, 2015, 11:58:55 PM »
Hi Will and welcome to the forum!

Don

Offline AussieJimG

  • Full Member
  • ****
  • Posts: 450
  • Bywong, NSW, Australia
Re: hello from Dublin
« Reply #5 on: January 13, 2015, 01:02:22 AM »
Welcome to the forum Will.

Jim

Offline vcutajar

  • Full Member
  • *****
  • Posts: 2504
  • Marsascala, MALTA
Re: hello from Dublin
« Reply #6 on: January 13, 2015, 02:37:22 AM »
Hi Will and glad you found us.

Vince

Offline Danny M2Z

  • Full Member
  • ****
  • Posts: 65
Re: hello from Dublin
« Reply #7 on: January 13, 2015, 02:47:59 AM »
G'day from downunder Will.

As you might have noticed, pretty multicultural mob here.

I think there is a Zeemap for you to stick a pin in if you wish!

* Danny M *
Measure twice - cut once. You can't put it back!

Offline fumopuc

  • Full Member
  • *****
  • Posts: 2591
  • Munich, Germany, EU
Re: hello from Dublin
« Reply #8 on: January 13, 2015, 04:34:29 AM »
Hi Will, welcome to the group.
Kind Regards
Achim

Offline CHP

  • Full Member
  • ****
  • Posts: 73
  • cheers
Re: hello from Dublin
« Reply #9 on: January 13, 2015, 01:26:59 PM »
Welcome to MEM :hi:
12x36 lathe,Seig7x10 lathe, Taig lathe
9x29 Mill, Emco 55 CNC mill.......

Online Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 4082
  • Portland, Oregon, USA
Re: hello from Dublin
« Reply #10 on: January 13, 2015, 03:58:38 PM »
Hi Will, welcome to MEM!
Kim