Author Topic: Model Otto_Deutz  (Read 3732 times)

Online Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 12191
  • Hampshire, england.
Re: Model Otto_Deutz
« Reply #15 on: March 26, 2019, 08:09:36 AM »
In the UK Heinz's casting sets are available from Engineers Emporium: http://www.theengineersemporium.co.uk/ (Yes I know the web pages are useless and don't show the engines  :disappointed: ) They may sell you the drawings seperatley.

I believe that there is another stockist in Switzerland   :noidea:

Jo
Usus est optimum magister

Offline Jasonb

  • Full Member
  • *****
  • Posts: 6302
  • Surrey, UK
Re: Model Otto_Deutz
« Reply #16 on: March 26, 2019, 08:18:17 AM »
It's just a case of finding the right page on EE's site where they list a lot of the engines

http://www.theengineersemporium.co.uk/catalogue-pages/petrolengkits.html#

Online Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 12191
  • Hampshire, england.
Re: Model Otto_Deutz
« Reply #17 on: March 26, 2019, 08:21:40 AM »
But there are many more that are not shown  :ShakeHead:

Jo
Usus est optimum magister

Offline Jasonb

  • Full Member
  • *****
  • Posts: 6302
  • Surrey, UK
Re: Model Otto_Deutz
« Reply #18 on: March 26, 2019, 08:28:33 AM »
That's why I have got the paper catalogue though even that can be a bit lacking how are those tulip style drawings going?

I'm sure I have seen a scratch built one of these on one of the forums, it would be nice at 38mm bore with a 300mm flywheel which would still be a manageable size.

Online Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 12191
  • Hampshire, england.
Re: Model Otto_Deutz
« Reply #19 on: March 26, 2019, 08:31:02 AM »
..... how are those tulip style drawings going?

They are not  :-X

You have to remember I am now retired so I no longer have the spare time I used to have when I was working for a living  :shrug:

Jo
Usus est optimum magister

Offline Jasonb

  • Full Member
  • *****
  • Posts: 6302
  • Surrey, UK
Re: Model Otto_Deutz
« Reply #20 on: March 26, 2019, 08:39:10 AM »
Toby, is the 1/10th engine that is going to be published the one by Johan Van Zanten?


Offline TobyTetzy

  • Full Member
  • ****
  • Posts: 113
Re: Model Otto_Deutz
« Reply #21 on: March 26, 2019, 08:49:00 AM »
Hello,

thank you all.

Jason, yes, it is the engine of Johann.
Unfortunately he passed away last year.  :-[
A great man.  :praise2:

Toby

Offline Jasonb

  • Full Member
  • *****
  • Posts: 6302
  • Surrey, UK
Re: Model Otto_Deutz
« Reply #22 on: March 26, 2019, 08:55:26 AM »
Sad news, the last time I was in contact with him he was in poor heath but was working on a scratch built Allman engine which he probably did not get to finish :(

Online gbritnell

  • Full Member
  • ****
  • Posts: 1908
Re: Model Otto_Deutz
« Reply #23 on: March 26, 2019, 11:05:44 AM »
Thanks so much for the reference. I think you'll find that once you have done a couple of parts the whole process becomes much easier. I find it very satisfying when a part appears from a block of metal.
gbritnell
Talent unshared is talent wasted.

Offline TobyTetzy

  • Full Member
  • ****
  • Posts: 113
Re: Model Otto_Deutz
« Reply #24 on: March 29, 2019, 08:52:43 AM »
Hello,

a little information about Heinz Kornmüller.
I wrote him on his old e-mail address info@classic-motors.at.
However, the answer came from sales@theengineersemporium.co.uk.  :o

This may explain why the homepage classic-motors.at by Heinz is no longer available or is under construction.

Greeting Toby