Author Topic: Cheap Sine Vice  (Read 5105 times)

Bogstandard

  • Guest
Cheap Sine Vice
« on: August 29, 2012, 05:44:31 PM »
Stew and Dek called around this afternoon for a natter, and as they had just sat down, this was delivered.



It was agreed by all that it was a very nice quality and the price was definitely right.

Just one note, it is designed to be used with a magnetic chuck, but I will be making a clamp bar so that it can easily be used on my mill.

This is where it came from if anyone is interested in maybe getting one for themselves. Not many left though, because at about 1/3rd of the normal price, they will go fast.

http://www.ebay.co.uk/itm/New-PRECISION-SINE-VICE-/130634264022?pt=LH_DefaultDomain_3&hash=item1e6a68add6


John


Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Cheap Sine Vice
« Reply #1 on: August 29, 2012, 05:46:47 PM »
Your right on that Bogs!   At that price, they will go fast!

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Arbalest

  • Guest
Re: Cheap Sine Vice
« Reply #2 on: August 29, 2012, 06:32:26 PM »
Looks nice John!

Offline sbwhart

  • Full Member
  • ****
  • Posts: 745
  • Live Long and Prosper
Re: Cheap Sine Vice
« Reply #3 on: August 29, 2012, 06:33:59 PM »
I was eye   balling that litte beuity this afternoon and its a peach  :P

Stew
A little bit of clearance never got in the way

Bogstandard

  • Guest
Re: Cheap Sine Vice
« Reply #4 on: August 29, 2012, 07:14:53 PM »
Only 1 left now so be quick

John

Offline Don1966

  • Full Member
  • *****
  • Posts: 6817
  • Columbia, MS
Re: Cheap Sine Vice
« Reply #5 on: August 29, 2012, 11:33:51 PM »
I have one similar John that I had bought from LMS. It has provision for clamping on the front and aft. It is slotted, so these could probably be slot for clamping also.

Don

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal