Author Topic: Moriya by Dr James R Senft  (Read 6893 times)

Offline mnay

  • Full Member
  • ****
  • Posts: 77
Re: Moriya by Dr James R Senft
« Reply #15 on: November 18, 2014, 08:23:17 PM »
For what it is worth, I just completed the engine part of the Moriya fan.  I didn't want to fiddle with the gaskets so I just machined the parts to take up the length where the gaskets go and it seems to run fine.
Great little design.  Seems to have quite a bit of power for such a small stirling motor.
Thanks,
Mike Nay

Offline mnay

  • Full Member
  • ****
  • Posts: 77
Re: Moriya by Dr James R Senft
« Reply #16 on: November 18, 2014, 08:24:27 PM »
sorry if the video plays sideways
Mike

Offline chucketn

  • Full Member
  • ****
  • Posts: 394
  • East TN, USA
Re: Moriya by Dr James R Senft
« Reply #17 on: November 18, 2014, 08:54:39 PM »
Nice work, Mike. Hope mine turns out as nice!

Chuck

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13756
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Moriya by Dr James R Senft
« Reply #18 on: November 19, 2014, 01:09:51 AM »
Nicely done Mike. Runs well too....even sideways :)

Bill

Online Quadra

  • Full Member
  • ****
  • Posts: 20
  • Cambridge UK
Re: Moriya by Dr James R Senft
« Reply #19 on: November 19, 2014, 02:09:55 PM »
Chuck,
I've only just come across this thread.
Look up 'Myfordboy.blogspot'  he sells a wood stove fan casting kit.

John

Offline chucketn

  • Full Member
  • ****
  • Posts: 394
  • East TN, USA
Re: Moriya by Dr James R Senft
« Reply #20 on: November 19, 2014, 04:43:12 PM »
I've seen Myfordboys site. I tried to just buy his plans, but no deal. The kit is well above this pensioners budget.

Chuck