Author Topic: American Precision Museum Annual M/E Show  (Read 8795 times)

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
American Precision Museum Annual M/E Show
« on: August 21, 2014, 10:36:18 PM »
Just got a notice for The American Precision Museum's Annual Model Engineering Show. October 25-26 in Windsor, Vermont.
I showed last year and enjoyed it. Small show but good showing of engines.
My favorite machine in the museum is the first Bridgeport mill. Has serial # 1.

I plan on being there with the MEM banner.
Anyone joining me?
Best,
Stan

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: American Precision Museum Annual M/E Show
« Reply #1 on: August 22, 2014, 12:13:53 AM »
I wish Stan, but a bit far and much too busy a time of year for me. Hope you will take some more great pictures though.  Will the RE be going along for the trip?

Bill

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: American Precision Museum Annual M/E Show
« Reply #2 on: August 22, 2014, 01:35:09 AM »
The Rider? As you-know-who would say,"Lord willing and the creek don't rise" it will be there.
Best,
Stan

Offline Tennessee Whiskey

  • Full Member
  • *****
  • Posts: 3781
  • Springfield, Tennessee. USA
Re: American Precision Museum Annual M/E Show
« Reply #3 on: August 22, 2014, 01:44:04 AM »
Sounds like fun and I remember your pics from last year. That sure is way up north for an old rebel though :lolb:  . Hey Vern, cheese ships very well though, doesn't it Bill 8)

Cletus

Offline RonGinger

  • Full Member
  • ****
  • Posts: 301
  • Boothbay Maine USA
    • Pleasant Cove Models
Re: American Precision Museum Annual M/E Show
« Reply #4 on: August 22, 2014, 01:47:25 AM »
I will likely be there this year. I skipped the last couple years because they moved it to the Columbus Day weekend and the hotel I usually stayed at went from about $70 to $150. I dislike paying crazy prices. This year they are back to the old dates so I will go.

It is a small show, but it makes a nice weekend away for me so I enjoy it.

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: American Precision Museum Annual M/E Show
« Reply #5 on: August 22, 2014, 02:09:59 AM »
Bubba
Fly to Philly. We'll drive to Vermont. ROAD TRIP!!
Best,
Stan

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: American Precision Museum Annual M/E Show
« Reply #6 on: August 22, 2014, 02:12:07 AM »
Hey Big E...where you been bud?

Bill

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: American Precision Museum Annual M/E Show
« Reply #7 on: September 18, 2014, 05:26:47 PM »
I'm going. Chris is going. Ron is going.
Anyone else? Steamer??
I'm taking the MEM banner and I can save spaces.
Best,
Stan

Offline vascon2196

  • Full Member
  • ****
  • Posts: 74
  • "a good craftsman never blames his tools"
Re: American Precision Museum Annual M/E Show
« Reply #8 on: September 18, 2014, 05:56:06 PM »
I'm looking forward to it.

It is about 3 hours from my doorstep.

I'm also looking forward to grabbing lunch and a few beers from the Harpoon Brewery (5 minutes away from the show).

Chris from Southeastern Massachusetts

"a good craftsman never blames his tools"

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: American Precision Museum Annual M/E Show
« Reply #9 on: October 21, 2014, 01:19:19 PM »
With the show coming up this weekend, other than Ron, Chris and I, anyone else going? Steamer? Anyone?
Best,
Stan

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: American Precision Museum Annual M/E Show
« Reply #10 on: October 21, 2014, 01:24:18 PM »
Don't forget your camera Stan :)

Bill

Offline jschoenly

  • Full Member
  • ****
  • Posts: 87
Re: American Precision Museum Annual M/E Show
« Reply #11 on: October 21, 2014, 01:28:36 PM »
I wish I could run up with some of George's Collection, but the auction schedule keeps us close to home.  Hope everyone has a good time and a great show!
Jared
                                 Cabin Fever Expo
--- Model Engineering and Home Shop Hobbies in all Forms! ---

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: American Precision Museum Annual M/E Show
« Reply #12 on: October 21, 2014, 01:28:58 PM »
All ready to go. Empty flash card. Charged battery. I'll try to post from the motel after the show depending on the bandwidth available. If not, Monday.
Best,
Stan

Offline kuhncw

  • Full Member
  • ****
  • Posts: 232
Re: American Precision Museum Annual M/E Show
« Reply #13 on: October 21, 2014, 09:05:20 PM »
Another nice attraction at Windsor, in addition to the Precision Museum, is the Harpoon Brewery a bit north of Windsor.

Harpoon serves a great lunch and the beer could not be fresher.

I'm looking forward to photos from the model show.

Regards,


Chuck

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: American Precision Museum Annual M/E Show
« Reply #14 on: October 22, 2014, 03:12:23 PM »
FYI
Here's the program.

Best,
Stan

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: American Precision Museum Annual M/E Show
« Reply #15 on: October 25, 2014, 10:19:51 PM »
I just returned to the motel after the show ended. Although it’s not a large show, the museum does a very nice job running it. Setup was yesterday, followed by a wine and Vermont cheese reception. Small groups were taken on a “backstage tour” of the storage floors where the part of the collection that isn’t currently on the main museum floor is stored. Amazing collection of items ranging from large machinery to a Brown and Sharpe micrometer that measures to .00001 (it was used to QC gage blocks.) Didn’t seem to be a problem when I was lying on the floor to get a look at the bottom of the hot cap on their 5” Rider-Ericsson.

I’ll be leaving for the 6 hour drive back home in the morning. Here’s an album to give you some idea of what went on.


http://s1126.photobucket.com/user/sshire/slideshow/American%20Precision%20Museum%20Show%20-%202014

Best,
Stan

Offline stevehuckss396

  • Full Member
  • ****
  • Posts: 1554
  • Sterling Heights, MI USA
    • Steve's Miniature Sparkplugs
Re: American Precision Museum Annual M/E Show
« Reply #16 on: October 25, 2014, 11:02:10 PM »
Great display, thanks for posting the pix!
Do not be like the cat who wanted a fish but was afraid to get his paws wet.

Online steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: American Precision Museum Annual M/E Show
« Reply #17 on: October 25, 2014, 11:21:54 PM »
Great slide show Stan!    Wish I was there!

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: American Precision Museum Annual M/E Show
« Reply #18 on: October 25, 2014, 11:49:04 PM »
we missed you, Steamer.
Best,
Stan

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: American Precision Museum Annual M/E Show
« Reply #19 on: October 26, 2014, 12:31:13 AM »
Looks like a wonderful show Stan and some beautiful models including your new RE :).  Thanks for taking the time to take and post the pics and safe travels home.

Bill

Offline Tennessee Whiskey

  • Full Member
  • *****
  • Posts: 3781
  • Springfield, Tennessee. USA
Re: American Precision Museum Annual M/E Show
« Reply #20 on: October 26, 2014, 01:02:07 AM »
Darn good looking show Vern. Looks like the RE had a few family members there as well. Also some nice tandems. Only two things I saw wrong,  one, I wasn't there and that last pic :lolb:


Offline fumopuc

  • Full Member
  • *****
  • Posts: 3231
  • Munich, Germany, EU
Re: American Precision Museum Annual M/E Show
« Reply #21 on: October 26, 2014, 04:39:47 AM »
Hi Stan, thanks for sharing these pictures. Some very interesting models are on display there. The best of course, the first RE.
Kind Regards
Achim

Offline Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 15293
  • Hampshire, england.
Re: American Precision Museum Annual M/E Show
« Reply #22 on: October 26, 2014, 08:29:16 AM »
Nice set of engines on show 8)

I saw an unusual "Atkinson" engine  :thinking: might need to dig around a bit  :naughty:

Jo
Enjoyment is more important than achievement.

Offline wagnmkr

  • Full Member
  • ****
  • Posts: 914
  • Lindsay, Ontario, Canada
Re: American Precision Museum Annual M/E Show
« Reply #23 on: October 26, 2014, 10:34:26 AM »
Thanks for all the pics Stan ... Very interesting looking affair.

Tom
I was cut out to be rich ... but ... I was sewn up all wrong!

Offline gbritnell

  • Full Member
  • ****
  • Posts: 2460
Re: American Precision Museum Annual M/E Show
« Reply #24 on: October 26, 2014, 11:31:14 AM »
Thanks Stan,
It looks like the show was well represented with some great engines.
gbritnell
Talent unshared is talent wasted.

Offline philjoe5

  • Full Member
  • ****
  • Posts: 1012
Re: American Precision Museum Annual M/E Show
« Reply #25 on: October 26, 2014, 11:49:51 AM »
Thanks for the pictures Stan.  I recognized quite a few engines there.  Wish I could have gone

Cheers,
Phil
If you pick up a starving dog and make him prosperous, he will not bite you. This is the principal difference between a dog and a man.  - Mark Twain

Offline RonGinger

  • Full Member
  • ****
  • Posts: 301
  • Boothbay Maine USA
    • Pleasant Cove Models
Re: American Precision Museum Annual M/E Show
« Reply #26 on: October 26, 2014, 12:28:36 PM »
Stan, it was great meeting you and getting to talk a while on Friday during setup. Your photos are great, and like happens every show I look at someones photos and wonder how I missed so much.

The Atkinson cycle engine was I think a Phil Duclos design in Home shop Machinist. The model in the photo was by Barney Drillen, another Mainer.

I was impressed at this years show. The person running it, Sarah Rooker did a great job in promoting it and the place was very busy. The last year I went it was kind of like a morgue. I will plan to go back next year.

I managed to find a couple good buys- at the Electronic Surplus store I got a nice shop crane I will use to move my 8" 6 jaw chuck- somehow that thing has gained weight and I have a hard time mounting it now. I also found a nice 4" Buck 6 jaw for $100, it has no back plate, but has the screws for the adjustment mounting. I also found a mill centering microscope for just $5. I have not had time to examine it yet, but if its Ok that was a great deal.

Offline vascon2196

  • Full Member
  • ****
  • Posts: 74
  • "a good craftsman never blames his tools"
Re: American Precision Museum Annual M/E Show
« Reply #27 on: October 26, 2014, 01:09:07 PM »
Great job Stan...thanks for sharing.

I'll upload my pictures and videos when I'm done with my homework.

Uggg....Homework  :disappointed:
Chris from Southeastern Massachusetts

"a good craftsman never blames his tools"

Offline Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 15293
  • Hampshire, england.
Re: American Precision Museum Annual M/E Show
« Reply #28 on: October 26, 2014, 02:46:41 PM »
The Atkinson cycle engine was I think a Phil Duclos design in Home shop Machinist. The model in the photo was by Barney Drillen, another Mainer.

That's the one  ;D

Thanks for the details, now I just have to find someone who has Home Shop Machinist this side of the pond so I can borrow the mags :noidea:

Jo
Enjoyment is more important than achievement.

Online Dave Otto

  • Full Member
  • *****
  • Posts: 4693
  • Boise, Idaho USA
    • Photo Bucket
Re: American Precision Museum Annual M/E Show
« Reply #29 on: October 26, 2014, 03:56:02 PM »
Nice line up of hot air fans,

Thanks for the pictures Stan.

Dave

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal