Author Topic: Wabeco Screw Cutting Clutch  (Read 6185 times)

Offline ths

  • Full Member
  • ****
  • Posts: 1801
  • Kangaroo Valley, NSW, Australia
Re: Wabeco Screw Cutting Clutch
« Reply #15 on: May 16, 2014, 11:24:45 PM »
I hope you won't disappear from this place. The one you had troubles with can be a very unusual place indeed, but then it's mostly chatter there, and the focus can spread wildly and with hurtful results.

All the best,

Hugh.

Offline Don1966

  • Full Member
  • *****
  • Posts: 6818
  • Columbia, MS
Re: Wabeco Screw Cutting Clutch
« Reply #16 on: May 17, 2014, 01:41:30 AM »
Good luck with the hand ops Gray. I am also glad you share your expertise with us. Thanks you for your efforts and contributions to the forum, much appreciated here.

Don

Offline Steamer5

  • Global Moderator
  • Full Member
  • *****
  • Posts: 1272
  • The "Naki" New Zealand
Re: Wabeco Screw Cutting Clutch
« Reply #17 on: May 17, 2014, 10:34:53 AM »
Hi Gray,
 Just like to pass on my best wishes also for the hand op. Like others here I am in awe of the work you do & that you are more than happy to share it. I hope you are not left handed & will be able to draft & write while you get over Mac's attention! I'm sure there is a bunch of us here that cant wait for the next item you produce.
 

Cheers Kerrin
Get excited and make something!

Offline zeeprogrammer

  • Full Member
  • *****
  • Posts: 6811
  • West Chester, PA, USA
Re: Wabeco Screw Cutting Clutch
« Reply #18 on: May 17, 2014, 11:35:25 AM »
Best wishes a scar is your only reminder Gray.
Carl (aka Zee) Will sometimes respond to 'hey' but never 'hey you'.
"To work. To work."
Zee-Another Thread Trasher.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal