Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Hi Phil, the coil I have has only one terminal, that is my stumbling block. I have a 6v power supply & this 6v coil, I was hoping that I could use these, i know I need a condenser but it would be an inexpensive and a nice small solution.
I buy these cdi ignitions, cheap and easy to conect and dont take much place.http://www.hobbyking.com/hobbyking/store/__10996__Replacement_CDI_Ignition_for_RCG_50CC_Engines.html
Hi Zephyrin, I ran the ohmeter over the terminals, I got continuation between the spade connector & the frame and a slight movement between the HT lead & spade connector.Will I be right with live to spade connector, wire from frame split to points & condensor then both to earth, not forgetting to isolate the frame!