Author Topic: valves  (Read 4016 times)

Offline rarach22

  • Full Member
  • ****
  • Posts: 392
valves
« on: March 19, 2014, 01:27:19 PM »

Offline Steamer5

  • Global Moderator
  • Full Member
  • *****
  • Posts: 1272
  • The "Naki" New Zealand
Re: valves
« Reply #1 on: March 19, 2014, 02:04:31 PM »
Hi Pavel,
 Those are some nice valves. Any "build" pictures or drawings? The collecto-manaics of us on this forum just love both! If not, ah well, can you tell us a little about them please.

Cheers Kerrin
Get excited and make something!



Offline rarach22

  • Full Member
  • ****
  • Posts: 392
Re: valvesq
« Reply #4 on: March 19, 2014, 08:45:31 PM »
Hi, here are few links on some of my motor drawings. Pavel

Offline stevehuckss396

  • Full Member
  • ****
  • Posts: 1554
  • Sterling Heights, MI USA
    • Steve's Miniature Sparkplugs
Re: valves
« Reply #5 on: March 19, 2014, 10:51:27 PM »
Nice work on the valves. Those are Deluxe!
Do not be like the cat who wanted a fish but was afraid to get his paws wet.

Offline fumopuc

  • Full Member
  • *****
  • Posts: 3231
  • Munich, Germany, EU
Re: valves
« Reply #6 on: March 20, 2014, 06:18:50 AM »
Hi Pavel, nice work. Your drawings are looking very similar to mine. It seems we are using a similar not "ISO" standard style.
Kind Regards
Achim

Offline Ramon Wilson

  • Full Member
  • ****
  • Posts: 1942
  • Suffolk in the UK
Re: valves
« Reply #7 on: March 20, 2014, 09:04:48 AM »
Very nice work Pavel  :ThumbsUp: Are you aware of the technique of using an engraving tool to give a cast effect to the surfaces ?

Ramon
"I ain't here for the long time but I am here for a good time"
(a very apt phrase - thanks to a well meaning MEM friend)

Online steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: valves
« Reply #8 on: March 20, 2014, 09:21:20 AM »
Very nice work on the valves!    :ThumbsUp:

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline rarach22

  • Full Member
  • ****
  • Posts: 392
Re: valves
« Reply #9 on: March 20, 2014, 12:09:00 PM »
Very nice work Pavel  :ThumbsUp: Are you aware of the technique of using an engraving tool to give a cast effect to the surfaces ?

Ramon

Yes, I know the product is photographed before Finishes Pavel

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal