Author Topic: bolt cutoff fixture  (Read 2661 times)

Offline Bill Stupak

  • Jr. member
  • **
  • Posts: 4
bolt cutoff fixture
« on: July 25, 2012, 07:47:16 PM »
I bought this 6"cut off tool at HF. To make it useful for cutting bolts down I tapped holes for various sizes in a short length of 1/4" steel angle, SAE on one side and Metric on the other. The angle is mounted so the flat side is flush with the back side of the blade. To use I thread the bolt into the proper hole to the depth I need and chop away, easy peasy.

« Last Edit: July 26, 2012, 02:56:29 AM by Bill Stupak »

Offline KB

  • Full Member
  • ****
  • Posts: 157
Re: bolt cutoff fixture
« Reply #1 on: July 26, 2012, 01:48:19 AM »

Nice little unit Bill. Good idea.