Author Topic: ED Bee Con Rod  (Read 4224 times)

Offline Allen Smithee

  • Full Member
  • ****
  • Posts: 1130
  • Mordor, Middle Earth
ED Bee Con Rod
« on: July 30, 2018, 04:02:32 PM »
A friend of mine has come by an ED Bee which he'd quite like to use in a suitable radio-assist vintage model. The engine seems to be in pretty good nick except that it has a broken con rod. My normal sources have drawn a blank on this (including Alan Greenfield), so I wondered if anyone here had a spare one they don't need? The engine is a mk2 Bee, so it has the Aluminium rod rather than the case-hardened steel one. As far as I know the ED Cadet rod was probably the same as well. SO if anyone has one could they possibly get in touch?

Failing that - given that he wants to use it as a runner rather than a museum piece, and a basic rod for a small, low-power diesel isn't exactly the most complex job in the world, does anyone have a drawing or even just the principle dimensions? I guess I could probably get by with the big/little-end bore sizes, the distance between centres and the thickness...

TIA,

AS
Quidquid latine dictum sit altum sonatur

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: ED Bee Con Rod
« Reply #1 on: July 30, 2018, 04:09:41 PM »
Is the broken con rod mangled beyond taking measurements from it?

Bill

Offline Allen Smithee

  • Full Member
  • ****
  • Posts: 1130
  • Mordor, Middle Earth
Re: ED Bee Con Rod
« Reply #2 on: July 30, 2018, 06:25:08 PM »
Is the broken con rod mangled beyond taking measurements from it?

Bill

No, but half of it is missing!

AS
Quidquid latine dictum sit altum sonatur

Offline Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 15294
  • Hampshire, england.
Re: ED Bee Con Rod
« Reply #3 on: July 30, 2018, 06:35:35 PM »
Ask on Adrian's blog http://adriansmodelaeroengines.com/wordpress/ to see if someone knows the correct length and then it should be easy enough to make as it is only a simple steel rod

Jo
Enjoyment is more important than achievement.

Offline Admiral_dk

  • Full Member
  • *****
  • Posts: 3752
  • Søften - Denmark
Re: ED Bee Con Rod
« Reply #4 on: July 30, 2018, 09:08:53 PM »
I had the notion to ask Ron Chernich before he died about collecting such data for future repairs .... maybe Adrian would be interested.

I do have a number of in-complete production engines where pistons an rods are missing, so beside rod length, it would be nice to have piston height and pin position (distance from crown). I have made an excel file on all my engines and do fill in as I get info - or disassemble one of the complete ones.

- But I do not have any info on the ED Bee - sorry.

Offline Allen Smithee

  • Full Member
  • ****
  • Posts: 1130
  • Mordor, Middle Earth
Re: ED Bee Con Rod
« Reply #5 on: July 30, 2018, 10:52:53 PM »
it should be easy enough to make as it is only a simple steel rod

The original was forged aluminium, but I suspect one made from bar-stock dural will be adequate. But yes, it's not a hard thing to make.

AS
Quidquid latine dictum sit altum sonatur

Offline Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 15294
  • Hampshire, england.
Re: ED Bee Con Rod
« Reply #6 on: August 05, 2018, 04:08:10 PM »
Eric says he has one for you  ;)

Jo
Enjoyment is more important than achievement.

Offline Allen Smithee

  • Full Member
  • ****
  • Posts: 1130
  • Mordor, Middle Earth
Re: ED Bee Con Rod
« Reply #7 on: August 05, 2018, 04:29:24 PM »
Eric says he has one for you  ;)

Jo

Ace! I'll give him a call!

AS
Quidquid latine dictum sit altum sonatur

Offline Allen Smithee

  • Full Member
  • ****
  • Posts: 1130
  • Mordor, Middle Earth
Re: ED Bee Con Rod
« Reply #8 on: August 14, 2018, 11:26:00 AM »
Many thanks to Eric, and others for the help. My friend is now happy, and sent me this to prove it:

AS
Quidquid latine dictum sit altum sonatur

Offline Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 15294
  • Hampshire, england.
Re: ED Bee Con Rod
« Reply #9 on: August 14, 2018, 11:28:30 AM »
 8)

Jo
Enjoyment is more important than achievement.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal