Author Topic: Professional Machinist Videos  (Read 7187 times)

Offline 90LX_Notch

  • Full Member
  • ****
  • Posts: 1386
  • North Eastern Pennsylvania USA
    • YouTube Channel
Professional Machinist Videos
« on: October 26, 2013, 11:42:45 PM »
These are some YouTube Channels done by professional machinists to help amateurs-

http://www.youtube.com/user/KEF791/videos  (Keith Fenner- Turn Wright Machine Works)

http://www.youtube.com/user/Abom79/videos (Adam Booth)

http://www.youtube.com/user/oxtoolco/videos (Tom Lipton- Author of Metal Working Sink or Swim)

http://www.youtube.com/user/Figbash3/videos (Tom's Techniques)


http://www.youtube.com/user/THATLAZYMACHINIST/videos (A teacher but very good.)

https://www.youtube.com/channel/UCxMm_Cq-8nRfVz6niVbVQNQ (Old tech school films from DoAll Co.). Link added 9/30/15
« Last Edit: December 12, 2015, 04:27:08 PM by 90LX_Notch »
Proud Member of MEM

My Engine Videos on YouTube-
http://www.youtube.com/user/Notch90usa/videos

Offline sshire

  • Full Member
  • *****
  • Posts: 3043
    • LS Editions
Re: Professional Machinist Videos
« Reply #1 on: October 26, 2013, 11:56:47 PM »
Excellent! I've watched all of Keith Fenner's videos but wasn't aware of the others.
Thanks
Best,
Stan

Offline 90LX_Notch

  • Full Member
  • ****
  • Posts: 1386
  • North Eastern Pennsylvania USA
    • YouTube Channel
Re: Professional Machinist Videos
« Reply #2 on: December 12, 2015, 04:14:35 PM »
The DoAll videos are worth watching.  There are 50 of them.  There is some really good stuff there.  The YouTube channel is "College Machinist" and is a collection of instructional machine shop videos from the the late 1970's produced by DoAll.

Based on the view numbers for that channel, it doesn't appear that this collection is all that well known.  I would highly recommend them to everyone, no matter what their skill level.


https://www.youtube.com/channel/UCxMm_Cq-8nRfVz6niVbVQNQ (Old tech school films from DoAll Co.).

-Bob
« Last Edit: December 12, 2015, 04:27:38 PM by 90LX_Notch »
Proud Member of MEM

My Engine Videos on YouTube-
http://www.youtube.com/user/Notch90usa/videos

Offline wheeltapper

  • Full Member
  • ****
  • Posts: 61
Re: Professional Machinist Videos
« Reply #3 on: December 12, 2015, 04:17:40 PM »

The DoAll videos are worth watching.  There are 50 of them.  There is some really good stuff there.  The YouTube channel is "College Machinist" and is a collection of instructional machine shop videos from the the late 1970's produced by DoAll.

Based on the view numbers for that channel, it doesn't appear that this collection is all that well known.  I would highly recommend them to everyone, no matter what their skill level.


http://www.youtube.com/user/CollegeMachinist/videos (Old tech school films from DoAll Co.).

-Bob   


I get "this channel does not exist"

Roy.
I used to be confused, now I just don't know.

Offline Bluechip

  • Full Member
  • ****
  • Posts: 779
  • Derbyshire
Re: Professional Machinist Videos
« Reply #4 on: December 12, 2015, 04:23:50 PM »

Offline 90LX_Notch

  • Full Member
  • ****
  • Posts: 1386
  • North Eastern Pennsylvania USA
    • YouTube Channel
Re: Professional Machinist Videos
« Reply #5 on: December 12, 2015, 04:28:22 PM »
Thanks Dave.  I fixed the link.

-Bob
Proud Member of MEM

My Engine Videos on YouTube-
http://www.youtube.com/user/Notch90usa/videos