Author Topic: Gold Blend. Dark Roast........  (Read 6937 times)

Offline Stilldrillin

  • Full Member
  • ****
  • Posts: 679
  • Staveley, Derbyshire. England.
Re: Gold Blend. Dark Roast........
« Reply #15 on: October 26, 2013, 10:54:57 PM »
And..... Here's the burner, that was coming on, a couple of weeks ago! 

Usual build. Top of a salt grinder/ pot.
Brass disc, base, with central locating bar, and supporting foot underneath the wicktube.......

The crossbar locates nicely, in the rim of the bowl/ firebox.......

Until, my fumbly fingers knocked the burner, fully inside the firebox!   :facepalm:
The only way to retrieve, was to lift the hot engine, while it was running.  :(

A taller, breather tube, stopped that happening again.........

Here's another, final video........

<a href="" target="_blank"></a>

Job's a good un!   :cartwheel:

David D
« Last Edit: November 11, 2013, 04:56:48 PM by Stilldrillin »
Still modifying bits of metal... Occasionally, making an improvement!
Still drilling holes... Sometimes, in the right place!


  • Guest
Re: Gold Blend. Dark Roast........
« Reply #16 on: October 27, 2013, 12:21:01 AM »
Hey up marra, A nice rescue :NotWorthy: :NotWorthy: :NotWorthy:
Whats youre lass going to say about the salt pot. I will have a look for some of them as I need a couple of burners soon.