Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
I also need to machine the taper on the cam shaft and the crank shaft which means making a reamer. Dave
Quote from: steamer on December 26, 2016, 08:27:12 PMI also need to machine the taper on the cam shaft and the crank shaft which means making a reamer. DaveCan't you bore the two tapers and then cut the tapers on the crank and cam shafts at the same topslide settings, they are not that small that you can't get a boring bar inside them?