Author Topic: Handy, Meths Burner.......  (Read 7218 times)

Offline gary hart

  • Full Member
  • ****
  • Posts: 31
  • Vancouver, WA, USA
Re: Handy, Meths Burner.......
« Reply #15 on: August 26, 2013, 02:09:31 AM »

"Wire wicks....... How do you manage to vary the flame height? [/quote]"

Not sure what a wire wick is.    Have used with good results a real fine mesh stainless steel screen rolled up tight as a wick.   This works good as the fuel runs out and flame goes down it won't burn the wick.

To control flame size instead of moving the wick up and down a brass tube that slips over a brass tube that holds the metal wick slips up or down to expose more or less wick controlling flame size.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal