Have made a start on sorting out the shed so I can actually get to and use the machines.
Having moved houses in April the new place has a lack of storage place compared to the old one.
We had cupboards in the shed and a storage area in the roof above the shed that became the repository of years of accumulated crud.
I now need a place to store the stuff as we sort through it and bin/sell/give away the stuff no longer required.
So here is the semi blank canvas:
A trip to the local bunnings, which apart from the wife is one of the biggest money reducing agents known to man and we have this.
A start is made, massively over-engineered, but certainly won't be going anywhere in a hurry. The wife reckons if a major earthquake hits it will probably be the only thing left standing.
Some undercoat and a couple of layers of topcoat and we now have this.
Even had enough timber left over to make a new workbench. Plenty of bracing in there for the vice and X2 to be bolted to.
Still needs doors fitted, and was thinking of a thin stainless sheet for the top, saw one tube video where marking out was done straight on the bench top and can just be wiped off.
The doors have been fitted, all that is left now is to move the power point that was very inconveniently placed, fit some trim round the side, paint the doors and fit handles.
Then attack the stack of boxes and hire a skip bin to dump the crap.
Getting closer.
Simon