Author Topic: Home built Panbrake  (Read 3051 times)

Offline ausdier

  • Full Member
  • ****
  • Posts: 161
  • Burpengary, Australia.
Home built Panbrake
« on: June 24, 2013, 04:13:28 PM »
Just a little something I have been working on.
A home built Panbrake with minimal welding and able to do up to 600 wide and 1.6 thick (maybe thicker with testing)
When I get time to do the workshop drawings I will post the complete plans for this.
Cheers.

Offline Maryak

  • Global Moderator
  • Full Member
  • *****
  • Posts: 1818
  • Aldinga Beach South Australia
Re: Home built Panbrake
« Reply #1 on: June 25, 2013, 02:40:07 AM »
Looks good Ausdier  :NotWorthy:

Thanks for sharing the plans.

Best Regards
Bob
Если вы у Тетушки были яйца, она была бы Дядюшкой

Offline ausdier

  • Full Member
  • ****
  • Posts: 161
  • Burpengary, Australia.
Re: Home built Panbrake
« Reply #2 on: June 26, 2013, 05:59:04 PM »
Just a quick preview of parts and some overall dimensions.

Offline MuellerNick

  • Full Member
  • ****
  • Posts: 213
  • Germany // Outback of Munich
    • Motor-Manufaktur
Re: Home built Panbrake
« Reply #3 on: June 26, 2013, 07:26:51 PM »
Whenever I hear DIY brake, I think MagnaBend!


Nick

Offline ausdier

  • Full Member
  • ****
  • Posts: 161
  • Burpengary, Australia.
Re: Home built Panbrake
« Reply #4 on: June 27, 2013, 05:55:54 AM »
I have seen the magnabend and have thought about building one.
However, as each type of bender has their own good points and bad points I felt I would be better off going down the manual route.

Offline ausdier

  • Full Member
  • ****
  • Posts: 161
  • Burpengary, Australia.
Re: Home built Panbrake
« Reply #5 on: June 27, 2013, 11:30:38 AM »
Sheet 1 starts with a few of the larger items so people get an Idea of the size of material that is going to be used.

Offline ausdier

  • Full Member
  • ****
  • Posts: 161
  • Burpengary, Australia.
Re: Home built Panbrake
« Reply #6 on: July 07, 2013, 01:27:00 PM »
A little long for this sheet as I have been getting over a head cold  :(

Never the less here is sheet 2.

Offline ausdier

  • Full Member
  • ****
  • Posts: 161
  • Burpengary, Australia.
Re: Home built Panbrake
« Reply #7 on: July 13, 2013, 03:07:33 PM »
As I sit here enjoying my third Square Bear for the evening, I think it is high time for another installment. :cheers: