Author Topic: Another Webster  (Read 1614 times)

Offline cidrontmg

  • Full Member
  • ****
  • Posts: 18
  • Penafiel, Portugal
Another Webster
« on: June 17, 2013, 08:25:38 PM »
I'm trying to slowly banging metal to assemble another Webster engine. One piece at a time, and it's not much to show. But something.
I've assembled a Minimag magneto, works well, and there's a robust spark running at 200 rpm. I've also "assembled" Jan Ridders' "Blokker" spark ignitor, assembly - it's three components that will be removed, and one cap, one 1 Mohm resistor and a microswitch, to solder. And it's Blokker sparks worked excellently. And small, one AA battery and one PCB, 60 x 20 x 18.5 mm!
I've also built Ridder's gas tank/carburetor, in fact I have built 2 tanks, and I need one another. Webster's own proper gas tank is really small, I'm dubious if the Ridders' vapour carb will work. We'll see.  :smokin2:

Online b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13834
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Another Webster
« Reply #1 on: June 17, 2013, 11:47:04 PM »
Nice start on that Webster and great to see a new build starting also.