Author Topic: Potty Lads and Dads Mill Engine  (Read 2159 times)

Offline sbwhart

  • Full Member
  • ****
  • Posts: 660
  • Live Long and Prosper
Potty Lads and Dads Mill Engine
« on: May 24, 2013, 06:28:08 PM »







Follow this link to the build log http://www.modelenginemaker.com/index.php/topic,1801.0.html

Cheers

Stew
A little bit of clearance never got in the way

Offline vcutajar

  • Full Member
  • ****
  • Posts: 2433
  • Marsascala, MALTA
Re: Potty Lads and Dads Mill Engine
« Reply #1 on: May 24, 2013, 09:35:35 PM »
Nice engine Stew.  Love the colours.

Vince

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 9223
  • Central Massachusetts, USA
Re: Potty Lads and Dads Mill Engine
« Reply #2 on: May 25, 2013, 03:10:52 AM »
Wonderful Job Stew!

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline Pete49

  • Full Member
  • ****
  • Posts: 635
  • top of the gulf SA, Gateway to the Flinders Ranges
Re: Potty Lads and Dads Mill Engine
« Reply #3 on: May 25, 2013, 03:54:11 AM »
very nice finish. Beats polishing anyday
Pete
I used to have a friend.....but the rope broke and he ran away :(

Offline Robert Hornby

  • Full Member
  • ****
  • Posts: 391
  • Terrigal NSW Australia
Re: Potty Lads and Dads Mill Engine
« Reply #4 on: May 25, 2013, 06:30:38 AM »
Very nice indeed Stewart, I trust it runs as ell as it looks then it will be sweet.
Robert
Age and treachery will always overcome youth and skill

Offline sbwhart

  • Full Member
  • ****
  • Posts: 660
  • Live Long and Prosper
Re: Potty Lads and Dads Mill Engine
« Reply #5 on: May 25, 2013, 01:22:16 PM »
Her is the video


<iframe width="420" height="315" src="
frameborder="0" allowfullscreen></iframe>

Stew
A little bit of clearance never got in the way

Offline jonesie

  • Full Member
  • ****
  • Posts: 95
Re: Potty Lads and Dads Mill Engine
« Reply #6 on: May 25, 2013, 03:28:06 PM »
 :ThumbsUp:  nice build stew and nice runner i need to go back and read your build thanks for sharing. jonesie

Offline Kim

  • Full Member
  • *****
  • Posts: 2884
  • Portland, Oregon, USA
Re: Potty Lads and Dads Mill Engine
« Reply #7 on: May 25, 2013, 04:15:29 PM »
Yes!  Nice engine Stew!
I've enjoyed reading your build and have learned from it.  Thanks for taking the time to share with us all!
And thanks for the video :)
Kim