Straight 6,,maybe

[Camm-1]

Camm-1 you are moving along.

Will carburundum valve paste do it?

Did you use the same paste for your Hoglet?  I would use the same method you used in the Hoglet.

Vince

I made the liners of cast iron in the Hog and thats softer and just honed a bit wit a brakecylinder honer.
Now the liners are made of steelpipe and I see and feel some roughness in them.
They need to be broched or lapped with something.
Ove

Edit Jo  : sorting out formating problems.

[Camm-1]

Begin with the head today, my wife has laying in the flu whole week so
I had a lot of ours in the garage:))
Bore and ream for valveguides exhaust and start with sparkplugholes.

[Camm-1]

How it looks now.
Manage to drill all holes whitout crossing so I'm happy so far^-^

[tvoght]

This is looking great. I had missed the last installment, so this brought me up to date. I for one prefer the aesthetics of inline engines over the v configuration.

Looking forward to more.

--Tim

[stevehuckss396]

Looking good!!!

[Camm-1]

Thanks Steve & Tvought.
Made a expanding lappingtool today
It only expand on the middle but I think it worked ok.

[Camm-1]

A little update.
Have made the crankshaftbearingsupports, that get a long word
I have klamped them togheter then boring for crank and cam.
Finaly I put shafts in them to make it true square.
And some pics how it looks.
Ove

[zeeprogrammer]

That looks good Ove. Maybe it's more than a maybe?

[ths]

Yes, quite possibly, a quite probably. Good going, Ove.

Hugh.

[Camm-1]

Hi
Now the crankshaft and valvguides and seats are ready.
I have hope for this engine;D

[stevehuckss396]

We knew it would work all along.

[Camm-1]

Thanks Steve, I hope so.
But I realy want  a DRO to my mill. it would have been much easyer everything.
I shave start thinking about the ignition, if I choose one from ss machine which one would be the best?
Ove

[stevehuckss396]

Thanks Steve, I hope so.
But I realy want  a DRO to my mill. it would have been much easyer everything.
I shave start thinking about the ignition, if I choose one from ss machine which one would be the best?
Ove

He has one called the "Basic single spark CDI". Add the hall sensor and it's 60 bucks. That is what I would use.

[Camm-1]

Ok I will order one and I have one hallsensor over.

[crankshafter]

Hi Ove.
How are you? Been some time sice last time we where talking on the phone.
You are making progress on the straight six. Nice work.
As you mentioned, get you some digi scales or real DRO for the mill and you will never look back 
I call you.
Best
Bård