Author Topic: Cutting a Cam Lobe  (Read 3043 times)

Offline cfellows

  • Full Member
  • ****
  • Posts: 1700
Cutting a Cam Lobe
« on: January 08, 2013, 03:05:10 AM »
This is a video I made of cutting a single cam lobe on a gear hub.  It uses a rotary table and a boring head.

http://www.youtube.com/watch?v=ohqO0GIdoLU

Chuck
So many projects, so little time...

Offline Camm-1

  • Full Member
  • ****
  • Posts: 266
  • Sweden
Re: Cutting a Cam Lobe
« Reply #1 on: January 08, 2013, 06:04:24 AM »
Hi Chuck
Thank you , I been waiting for a video on this procedure! :praise2:
Ove

Offline ScroungerLee

  • Full Member
  • ****
  • Posts: 299
  • Southwest Connecticut, US, North America, Earth
Re: Cutting a Cam Lobe
« Reply #2 on: January 08, 2013, 12:47:37 PM »
Very nicely done video, thank you Chuck.

Lee
Mmmmm.... Shiny!

Offline Bill_S.

  • Full Member
  • ****
  • Posts: 28
Re: Cutting a Cam Lobe
« Reply #3 on: January 08, 2013, 06:08:51 PM »
Chuck,
Neat video.  Thank you.
Bill