Author Topic: Sparkplugs  (Read 3001 times)

Offline Mosey

  • Full Member
  • ****
  • Posts: 1586
  • Rosemont, New Jersey, USA
Sparkplugs
« on: December 13, 2012, 12:55:09 AM »
I have 1/4 x 32 threads in the head. What plugs are available to fit this?

Offline V 45

  • Full Member
  • ****
  • Posts: 384
  • central PA...USA
Re: Sparkplugs
« Reply #1 on: December 13, 2012, 01:31:19 AM »
Mosey,
You can try these folks...not affiliated...I'm sure there are more out there too...
http://www.cncengines.com/rc.html
or...
http://sparkplugs.morrisonandmarvin.com/14-32.php

Dave
Never assume the implied task has been completed !!

Offline Don1966

  • Full Member
  • *****
  • Posts: 6016
  • Morgan City, LA (Along the Gulf Coast)
Re: Sparkplugs
« Reply #2 on: December 13, 2012, 02:54:38 AM »
Mosey you can also get the spark plug from Margret Shore where you bought the casting. Or Jerry Howell site.

Don

Offline Mosey

  • Full Member
  • ****
  • Posts: 1586
  • Rosemont, New Jersey, USA
Re: Sparkplugs
« Reply #3 on: December 13, 2012, 03:00:55 AM »
Thanks for the information on the plugs. I will follow up with those sources. I have 1 Rimfire from my Farm Engine.
I will be back later with a question about the suggested ignition systems. I have a points and coil system also, made by Modelectric, that I might use if it will work for a 2 cylinder engine.

Offline stevehuckss396

  • Full Member
  • ****
  • Posts: 1406
  • Sterling Heights, MI
    • Steve's Miniature Sparkplugs
Re: Sparkplugs
« Reply #4 on: December 13, 2012, 04:00:05 AM »
I have had Dales plugs in my Peewee for years and they are still working like new.

http://www.daledetrich.com/
Do not be like the cat who wanted a fish but was afraid to get his paws wet.